Development of Novel and Emerging Technology for the Enhancement of Fault Diagnostics
Navy SBIR 2013.2 - Topic N132-144
SSP - Mr. Mark Hrbacek - mark.hrbacek@ssp.navy.mil
Opens: May 24, 2013 - Closes: June 26, 2013

N132-144 TITLE: Development of Novel and Emerging Technology for the Enhancement of Fault Diagnostics

TECHNOLOGY AREAS: Ground/Sea Vehicles, Electronics, Human Systems

ACQUISITION PROGRAM: Strategic Weapons Systems: Trident II D5 (ACAT I)

OBJECTIVE: The overall objective is to develop innovative methods and tools to optimize maintenance by determining the most effective maintenance path considering history, likelihood of success for corrective actions, time constraints, and likelihood of future failures and then provide corrective action data.

DESCRIPTION: The current submarines are using aging Inertial Navigation Systems (INS), and maintenance for the INS is increasing. As a result of the increasing need for maintenance of the INS, and the reduction of maintenance support, a need for maintenance to be optimized is increasing. However, only traditional means for troubleshooting exists.

To reduce the Mean Time To Repair (MTTR), an innovative tool is desired to optimize maintenance. This tool should be capable of determining the most likely corrective action to take when maintenance is required. The tool should at a minimum take into account past failures and their corrective actions, likelihood of success for corrective actions, time constraints to determine the optimal corrective action. The tool should also factor into account potential future failures. It is desired for this tool to be able to predict future failures which may or may not have occured in the past.

PHASE I: 1) Develop enhanced diagnostics tool approach containing the above-mentioned attributes. Development of a minimal proof of concept to evaluate feasibility would be beneficial, but is not required provided sufficient documentation is made available. 2) Develop metrics and a strategy for measuring the effectiveness of the proposed approach. 3) Produce a detailed research report outlining the concept of the tool, as well as the advantages and disadvantages of the proposed approach.

PHASE II: 1) Based on the results from Phase I, develop a fully functioning proof of concept solution. 2) Provide experiment results that evaluates effectiveness of the overall system. 3) Develop a final report completely describing the concept

PHASE III: Develop and evaluate a fully packaged enhanced diagnostic tool that is suitable for use in a multitude of military and commercial applications. If successful, this device would transition into a future SP24 Shipboard Systems Integration Development Program and/or the ESGN Sustainment Program.

PRIVATE SECTOR COMMERCIAL POTENTIAL/DUAL-USE APPLICATIONS: This technology would be able to be used in any advanced system that requires maintenance, such as a commerical Autonomous Underwater Vehicle's (AUV).

REFERENCES: None

KEYWORDS: Maintenance; Inertial; Navigation; Diagnostics; Faults; Submarine

** TOPIC AUTHOR (TPOC) **
DoD Notice:  
Between April 24 through May 24, 2013, you may talk directly with the Topic Authors (TPOC) to ask technical questions about the topics. Their contact information is listed above. For reasons of competitive fairness, direct communication between proposers and topic authors is
not allowed starting May 24, 2013, when DoD begins accepting proposals for this solicitation.
However, proposers may still submit written questions about solicitation topics through the DoD's SBIR/STTR Interactive Topic Information System (SITIS), in which the questioner and respondent remain anonymous and all questions and answers are posted electronically for general viewing until the solicitation closes. All proposers are advised to monitor SITIS (13.2 Q&A) during the solicitation period for questions and answers, and other significant information, relevant to the SBIR 13.1 topic under which they are proposing.

If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk at (866) 724-7457 or email weblink.