Advanced High Speed Bus Technologies for Units Under Test (UUT), Test and Evaluation
Navy SBIR 2016.2 - Topic N162-106
NAVAIR - Ms. Donna Attick - donna.moore@navy.mil
Opens: May 23, 2016 - Closes: June 22, 2016

N162-106
TITLE: Advanced High Speed Bus Technologies for Units Under Test (UUT), Test and Evaluation

TECHNOLOGY AREA(S): Electronics, Information Systems, Materials/Processes

ACQUISITION PROGRAM: PMA 260, Aviation Support Equipment

OBJECTIVE: Develop innovative test methods and associated tools required to support the advanced testing requirements of emerging high-speed bus technologies that are required for design-for-test as well as operational testing.

DESCRIPTION: Current state-of-the-art test tools handle conventional data buses, but cannot address the testing needs of new, high speed, data buses that are being incorporated in the latest aircraft enhancements. Next-generation Units Under Test (UUTs) are designed with high-throughput buses ranging from 100 Mbps to 1500 Mbps, and utilize various new data buses (e.g. Firewire, RS-422, Wi-Fi, SATA, SMPTE Video). This drives a need for faster digital communication buses in Automatic Test Equipment (ATE) to facilitate testing, file upload and download, and other UUT interactions.

The methods and tools developed will aid in the support of state-of-the-art bus technologies in the fleet, and also ensure the integrity, quality, and reliability of the signals and data communication associated with the buses. This effort should leverage the current Navy Automatic Test System (ATS) environments, and industry standards to support electronics maintenance.

High speed data buses are a new technology being introduced into Navy avionics, as well as electronic equipment in other Services. Solutions to fully test this new technology are required for Navy ATS. The technologies required will have a direct impact on testing associated with both design and operation of Units Under Test (UUTs) employing high speed communication interfacing and busing. This is evident in the need for standards in the DoD ATS Framework Integrated Product Team (IPT)’s key element UUT Device Interfaces (UDI). The UDI element recognizes the requirements for testing complex forms of data communication, and requires industry standards to ensure an open architecture approach is integrated in the resulting technologies. These technologies involve extremely high speed data rates, complex timing and synchronization, and high speed multiplexing, all of which require parameters that are capable of insuring signal integrity. Some of these parameters involve statistical measurements, bit error rates, and complex signal to noise and distortion measurements. Current and conventional test methods are not capable of achieving the degree of testing quality necessary to ensure the proper performance of these UUTs and maintaining the data integrity for high speed net-centric information exchanges.

In order to ensure consistency of approaches and tools, industry standards related to signals associated with advanced bussing should be considered, such as the Automatic Test Markup Language (IEEE-1671, ATML). In working with the current industry standards, deficiencies might be found. In this case, the effort would involve identifying/suggesting new standards, and/or modifications to existing standards, which would help ensure a consistent, open system, approach across DoD systems.

To achieve these objectives, a set of tools are required that employ standardized technologies associated with digital radio, wireless communication, switching, fiber optics, and networking, which are being employed in existing as well as new UUTs. These tools should encompass industry standard signal libraries (such as IEEE-1641), test descriptions describing parameterized test methods, and performance verification for communication with devices that have highly complex inputs and outputs. The tools need to configure test instrumentation such as waveform generators, digitizers, oscillators, up and down converters, bus analyzers, and high speed digital generators to support the development of the signals / methods required. These test and evaluation tools are expected to significantly reduce the test cost and foot print of support items, and enhance Test Program Set (TPS) rehost.

PHASE I: Design and demonstrate a proof of concept signal model necessary to support described technologies. Define a set of tools that utilize the signal model and show how they can be utilized together to support high speed bust testing. If noticed during development, make note of applicability of existing industry standards and the possible need to enhance these standards, or create new standards.

PHASE II: Further develop the Phase I products into a usable library of models and tools to support high speed bus testing. Evaluate and demonstrate the prototype tool using one of the members of the DoD family of testers, such as Navy Consolidated Automated Support System (CASS), Air Force Versatile Depot Automatic Test System (VDATS), and Army Integrated Family of Test Equipment (IFTE). Access to these testers will be provided at DoD labs or maintenance facilities as required and as available at no cost to the small business. Perform analysis of the models and tools to determine their ability to support high speed bus testing. Ensure the models and tools are consistent with industry standards, such as those defined by IEEE.

PHASE III DUAL USE APPLICATIONS: Finalize and deliver models and tools suitable for use on ATS across the DoD. Transition the technology to appropriate test platforms. Private Sector Commercial Potential: Bus testing is a generic technology used across DoD and industry. This proposal has direct impact to all DoD Services, and could be transitioned to various commercial industries.

REFERENCES:

  • IEEE STD 1671-2010, IEEE Standard for Automatic Test Markup Language (ATML for Exchanging Automatic Test Equipment and Test Information via XML (2011). http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=5706290&url=http%3A%2F%2Fieeexplore.ieee.org%2Fstamp%2Fstamp.jsp%3Ftp%3D%26arnumber%3D5706290
  • IEEE STD 1641-2010, IEEE Standard for Signal and Test Definition (2010). http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=5578923&url=http%3A%2F%2Fieeexplore.ieee.org%2Fstamp%2Fstamp.jsp%3Ftp%3D%26arnumber%3D5578923
  • IEEE STD 1394, Firewire System Design for Industrial and Factory Automation Applications. DOI: 10.1109/ETFA.2001.997744
  • Gorringe, C.; (2013). Bus Testing in a Modern Era, IEEE AUTOTESTCON 2013
  • Brown, M., Gorringe, C. & Lopes, T. (2009). Digital Signals in IEEE 1641 and ATML, IEEE AUTOTESTCON 2009
  • DoD ATS Executive Directorate website. http://www.acq.osd.mil/ats/

KEYWORDS: Automatic Test Equipment; Test Program; Bus Technologies; Electronics Maintenance; Data Communication; Digital Signals

** TOPIC AUTHOR (TPOC) **
DoD Notice:  
Between April 22, 2016 and May 22, 2016 you may talk directly with the Topic Authors (TPOC) to ask technical questions about the topics. Their contact information is listed above. For reasons of competitive fairness, direct communication between proposers and topic authors is
not allowed starting May 23, 2016 , when DoD begins accepting proposals for this solicitation.
However, proposers may still submit written questions about solicitation topics through the DoD's SBIR/STTR Interactive Topic Information System (SITIS), in which the questioner and respondent remain anonymous and all questions and answers are posted electronically for general viewing until the solicitation closes. All proposers are advised to monitor SITIS (16.2 Q&A) during the solicitation period for questions and answers, and other significant information, relevant to the SBIR 16.2 topic under which they are proposing.

If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk at 800-348-0787 or sbirhelp@bytecubed.com