MK 48 Torpedo Composite Fuel Tank
Navy SBIR 2020.1 - Topic N201-048
NAVSEA - Mr. Dean Putnam - dean.r.putnam@navy.mil
Opens: January 14, 2020 - Closes: February 12, 2020 (8:00 PM ET)

N201-048

TITLE: MK 48 Torpedo Composite Fuel Tank

 

TECHNOLOGY AREA(S): Weapons

ACQUISITION PROGRAM: PMS 404, Undersea Weapons Program Office

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

OBJECTIVE: Develop a composite fuel tank that meets the MK 48 torpedo system requirements and increases torpedo in-water performance.

DESCRIPTION: The current MK 48 torpedo fuel tank is manufactured primarily from aluminum. Due to the material properties of aluminum and the resulting product, the current fuel tank has a number of limitations: higher than ideal weight, internal reinforcing structures required for strength reducing internal volume that could otherwise be used for fuel, and a high susceptibility to corrosion.

Due to numerous weapon system requirements, no current commercial off-the-shelf (COTS) solution is available for immediate use by the MK 48 torpedo. Any COTS approach would need to be adapted for MK 48 use and be designed to survive at the maximum operating depth of the torpedo (>1200’) and significant torsional loads when putting a composite structure in the middle of a metal torpedo. Additionally, there are high load stresses due to the rapid depth changes, high speed and high turn rates inherent to a torpedo dynamic that other COTS ocean products would not experience.

The Navy is interested in improving the MK 48 torpedoes’ performance through an objective of a 20% increase in range and better utilization of more of the Otto fuel in the tank by decreasing or eliminating seawater/Otto fuel mixing during high-speed maneuvers. A secondary goal is to decrease the opportunity for corrosion in the tank, and reducing maintenance and life cycle costs of the fuel storage solution for the weapon. This upgrade for the MK 48 torpedo is important in furthering the Strategic Approach to ‘Build A More Lethal Force’. Additionally, topics for improvement include:

Decreased weight:  The total weight of the MK 48 torpedo has an effect on the buoyancy of the weapon that affects the torpedo’s performance. By utilizing materials with high strength to weight ratios, the weight of the fuel tank can be decreased. The goal for weight reduction is 10% for the fuel tank section. This allows additional fuel or hardware to be installed inside the MK 48 torpedo without affecting the torpedo’s performance.

Increased fuel tank internal volume:  The current fuel tank has internal ribs and separators that allow the fuel tank to survive the pressure requirements of the torpedo (NAVSEA Drawing 5893767) as well as decreasing the current designs Otto Fuel/Seawater mixing during high-speed maneuvers. By utilizing stronger materials, these ribs can be removed, which would allow for additional fuel storage. Other innovative methods and solutions for creating additional internal volume inside the fuel tank without impacting system requirements are of interest as well. The goal is to increase the usable fuel by 15% or more, which would yield a tactical significant improvement to the weapon.

Better separation of Otto fuel and seawater:  Otto Fuel II is the propellant used in the MK 48 torpedo. It has a density greater than water and is immiscible with water, which allows the fuel delivery system to displace consumed fuel with seawater during operation. This reduces the sidewall differential pressure requirement that would be significantly higher if required to operate at the full operational depth of the weapon. However, the seawater displacement system creates the opportunity for mixing during high-speed maneuvers and the ingestion of seawater into the torpedo power plant during operation, which results in shutdowns before fuel exhaustion. The current fuel tank has internal structures to mitigate this potential. However, fuel and seawater separation can be improved by designing improved separation or a better fuel management scheme. This would allow additional fuel to be consumed prior to seawater ingestion. The goal is to increase fuel utilization by 10% by increased Otto fuel/seawater separation.

Reduced fuel tank corrosion:  The current fuel tank and internal components are inherently subject to corrosive materials (reactants and seawater), which can cause extensive corrosion damage to high replacement cost items. By increasing the utilization of corrosion-inert materials and decreasing areas that are hard to flush or clean, corrosion damage can be reduced or eliminated along with associated hardware repair and replacement cost. The goal is to reduce fuel tank maintenance between runs and the maintenance required between storage turns by 30%. It is also a goal to reduce the need for replacement of the fuel tanks by 15% over the normal 20-year or greater life of the weapon.

The awardee will have to apply research in the field of composites to design and manufacture a composite pressure vessel that meets all of the MK 48 fuel tank requirements. Additionally, the awardee will have to determine a method to ensure adequate bonding at the interfaces between a composite fuel tank and existing MK 48 torpedo metal components. Fuel tank requirements include pressure loads; axial and radial force loading; temperature, vibration, shock, impact, and corrosion resistance; atmospheric control requirements; and hazards to electromagnetic radiation on ordnance requirements. The awardee will need to demonstrate that the design approach will withstand the maximum differential pressure that the fuel tank is expected to experience, which is the design test depth of the submarine plus the launch from a torpedo tube. The exact numbers are classified but it is >1200 feet of Seawater. Once these requirements are satisfactorily met, the application of composite pressure vessels can be applied to other cases where pressure vessels are required by the Navy or industry in Undersea Unmanned Vehicles, Naval Mines, and potentially manned submersibles. Fuel separation systems improvements will also require research and development and can be applicable to other fuel handling systems that are seawater compensated.

In order to qualify the design for Navy use, qualification testing will occur during Phase II.  The Government will furnish test services for all testing required specific to qualification of the design for the Torpedo (i.e., hydrostatic, land-based propulsion testing with the fuel tank, in-water testing, shock, vibration, thermal). Contractor testing may include bond testing of the composite to metal interface and coupon testing. Government testing will take place primarily at Naval Undersea Warfare Center Division Newport (NAVUNSEAWARCENDIVNPT), Naval Undersea Warfare Center Division Keyport (NAVUNSEAWARCENDIVKPT), or other sites where the Government has unique test capability.

Full Rate Production of the existing aluminum fuel tank begins in FY21 and is projected to go through FY30. Once this new composite fuel tank design is qualified and determined to have cost benefits and/or performance improvement, the Navy anticipates the new tank will be phased into production for replacing the aluminum fuel tank. Replacement of the current inventory of aluminum fuel tanks will also be considered as the MK 48 torpedo is expected to remain in service for at least 30 more years. 700 new fuel tank procurements are planned for the MK 48 Production program and for insertion into a large number active inventories of the U.S. Navy, and/or to be sold through foreign military sales.

Work produced in Phase II may become classified. Note: The prospective contractor(s) must be U.S. Owned and Operated with no Foreign Influence as defined by DOD 5220.22-M, National Industrial Security Program Operating Manual, unless acceptable mitigating procedures can and have been be implemented and approved by the Defense Security Service (DSS). The selected contractor and/or subcontractor must be able to acquire and maintain a secret level facility and Personnel Security Clearances, in order to perform on advanced phases of this contract as set forth by DSS and NAVSEA in order to gain access to classified information pertaining to the national defense of the United States and its allies; this will be an inherent requirement. The selected company will be required to safeguard classified material IAW DoD 5220.22-M during the advance phases of this contract.

PHASE I: Determine the technical concept and feasibility of manufacturing and fielding composite fuel tanks that meet the current requirements including deployment life. Work with the Government to ensure applicable requirements are understood, so that the awardee can develop a design proposal that will address all requirements. Address areas of weight reduction; improved fuel separation/management; technology improvements; and risk reduction of the metal to composite interfaces. Perform analysis on the concept to determine the ability of the concept to meet requirements, including exposure to environments from the stockpile to the target sequence and long-term exposure to Otto fuel. Assess the durability of the composite material to the shipboard handling and storage environment, and damage inspection techniques. Investigate manufacturing processes required to manufacture a prototype fuel tank. Perform a cost analysis to estimate the procurement costs and maintenance cost per 5-year period. Assess the improvements of the MK 48 torpedo’s tactical use. The Phase I Option, if exercised, will include the initial design concepts and plan to build a prototype in Phase II.

PHASE II: Design prototype fuel tanks with a minimum of one prototype manufactured to evaluate the proposed design approach. Evaluate the prototypes to determine if the design approach will accomplish the goals of this project concerning cost reduction, increased performance and decreased maintenance as well as the final design’s ability to meet the weapon’s environmental requirements. Conduct testing with the Navy to evaluate the increased fuel volume and fuel separation. When Navy specific assets are required for testing, the Navy will provide the assets or conduct the test for the performer. Refine the prototype until it can successfully transition to the Navy. Upon successful validation of a prototype, deliver the prototype(s) to the Government for the completion of MK 48 torpedo integration testing and in-water testing.

It is probable that the work under this effort will be classified (see Description section for details). If the Phase II Option is exercised, the performer will produce production representative prototypes (minimum of 6) that will be used to validate the design requirements against the MK48 torpedo’s design.

PHASE III DUAL USE APPLICATIONS: Phase III will finalize the design and manufacturing processes into final products and production drawings. The production of fuel tanks or license the technology to produce operational fuel tanks for the Navy will also be awarded in this Phase. The Phase III awardee will provide production drawings to the Government for configuration management and maintenance of the fuel tanks. The Phase III awardee will document and provide the Government assembly and disassembly procedures, inspection procedures, maintenance procedures, and repair procedures that will be used to support composite fuel tanks for the duration of their service life.

Technology and manufacturing methods developed on this SBIR topic could be transitioned to other military and commercial submersibles and industry for manned or unmanned applications. Commercial application include oil and gas exploration; deep-sea salvage and recovery operations; and deep-sea exploration, as examples.

REFERENCES:

1. “MIL-DTL-901E, 20 June 2017. Shock Tests H.I. (High Impact) Shipboard Machinery Common Equipment and Systems Requirements For.” https://www.crystalrugged.com/wp-content/uploads/2018/03/MIL-DTL-901E-DoD-detail-specification-1.pdf

2. “MIL-0-82672A(OS), 6 August 1986. MIL SPEC OTTO FUEL II.” http://everyspec.com/MIL-SPECS/MIL-SPECS-MIL-O/MIL-O-82672A_13078/

3. Yarrapragada K.S.S, Rao, Mohan, R. Krishna and Kiran, B. Vijay. “Composite Pressure Vessels.” International Journal of Research in Engineering and Technology, Vol.01, Issue 04, December 2012. ISSN: 2319-1163.
https://pdfs.semanticscholar.org/1119/752b11d766cbd15ffb699ef89406110d52ff.pdf

4. Kavekar, Mukund, Khatawate, Vinayak H. and Patil, Gajendra V. - “Weight Reduction of Pressure Vessel Using FRP Composite Material.” International Journal of Mechanical Engineering and Technology, Volume 4, Issue 3, July-August 2003. ISSN 0976-6340. https://www.academia.edu/20772591/WEIGHT_REDUCTION_OF_PRESSURE_VESSEL_USING_FRP_COMPOSITE_MATERIAL

5. MK 48 MOD 7 Heavyweight Torpedo Industry Day Presentation, MK 29 MOD 0 Warshot Fuel Tank. https://navysbir.com/n20_1/REF-5-N201-048.pdf

KEYWORDS: Composite Fuel Tank; Composite Pressure Vessel; High Strength Material Use in Fuel Tanks; Seawater Ingestion; Displacement of Fuel with Seawater; Corrosion in Fuel Systems