N212-117 TITLE: Infrared (IR) Optical Windows for Hypersonic Aerial Vehicles
RT&L FOCUS AREA(S): General Warfighting Requirements (GWR);Hypersonics;Microelectronics
TECHNOLOGY AREA(S): Materials / Processes
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: Design and develop infrared (IR) optical windows that are capable of protecting IR optical sensors and ensuring high-performance sensing during a hypersonic flight.
DESCRIPTION: Hypersonic aerial vehicles require the use of IR windows to protect sensitive opto-electronics from the aggressive aerothermal environment of high-speed flight while providing transparency to the IR optical signal used for intelligence, surveillance, reconnaissance, guidance, and communication applications [Ref 1]. The high temperatures of 3000 °F (1649 °C), or higher, associated with aerothermal impact of a high-speed/hypersonic vehicle during hypersonic flight, pose very challenging operating environments for the window material [Ref 2]. The interface surface or window material must be able to withstand extreme thermal, mechanical, and chemical environments during hypersonic flight that can limit the performance of the IR window and the IR sensor platform [Ref 3]. Furthermore, shock waves and extremely high heat loads produced during flight adversely impart wavefront distortions, and for this reason, affect the fidelity and accuracy of the signal/image detected by the optical sensors. Aerothermal-mechanical loads also create additional thermal requirements for the window to protect and insulate the sensor from the vehicle’s extreme exterior condition [Ref 4].
The Navy requires development and demonstration of a new class of IR windows that can operate at extreme conditions of high-heat fluxes and high-air pressures, and enable high-performance optical sensing during hypersonic flights. The key performance parameters for the windows include:
PHASE I: Develop, design, and demonstrate the feasibility of candidate materials for window application through material properties testing. Research and select the IR window candidate materials for each of the IR wavelength band. The testing should include optical transmissivity, structural strength, and thermal properties of the window materials. Use modeling and simulation to estimate the thermal-optical and elastic-optical effects of the window materials and the impacts on transmission amplitude and bandwidth during hypersonic flight. Provide a Phase II plan to develop and test the optical windows in accordance with their performance goals and key technical milestones while addressing technical risks and challenges discovered from the modeling and simulation in Phase I. The Phase I effort will include prototype plans to be developed under Phase II.
PHASE II: Fabricate the optical windows according to the fabrication plan laid out in Phase I. Perform comprehensive tests and evaluations of the fabricated candidate windows regarding their performance and reliability in a relevant hypersonic environment. Iterate the design/fabrication steps to modify the designs and fabrications of the optical windows due to technical challenges discovered in the test and evaluation phase to close the gaps in the performance and survivability endurance gaps.
PHASE III DUAL USE APPLICATIONS: Finalize development based on Phase II results, for transition and integration of the product into a hypersonic vehicle candidate airframe. Conduct flight test units for fielding on Navy experimental flight tests.
Potential commercial applications could include the applications of this research for infrared optical windows for commercial hypersonic re-entry vehicles.
KEYWORDS: Hypersonic; Optical Window; Infrared; IR; mid-wave infrared; MWIR; short-wave infrared; SWIR; long-wave infrared; LWIR; Wavefront Distortion; Aerothermal; Thermal-optical
TPOC-1: KK Law
Phone: (760) 608-3370
TPOC-2: Chandraika (John) Sugrim
Phone: (904) 460-4494
** TOPIC NOTICE **
The Navy Topic above is an "unofficial" copy from the overall DoD 21.2 SBIR BAA. Please see the official DoD Topic website at rt.cto.mil/rtl-small-business-resources/sbir-sttr/ for any updates.
The DoD issued its 21.2 SBIR BAA pre-release on April 21, which opens to receive proposals on May 19, 2021, and closes June 17, 2021 (12:00pm edt).
Direct Contact with Topic Authors: During the pre-release period (April 21 thru May 18, 2021) proposing firms have an opportunity to directly contact the Technical Point of Contact (TPOC) to ask technical questions about the specific BAA topic. Once DoD begins accepting proposals on May 19, 2021 no further direct contact between proposers and topic authors is allowed unless the Topic Author is responding to a question submitted during the Pre-release period.
SITIS Q&A System: After the pre-release period, proposers may submit written questions through SITIS (SBIR/STTR Interactive Topic Information System) at www.dodsbirsttr.mil/topics-app/, login and follow instructions. In SITIS, the questioner and respondent remain anonymous but all questions and answers are posted for general viewing.
Note: Questions should be limited to specific information related to improving the understanding of a particular topic’s requirements. Proposing firms may not ask for advice or guidance on solution approach and you may not submit additional material to the topic author. If information provided during an exchange with the topic author is deemed necessary for proposal preparation, that information will be made available to all parties through SITIS. After the pre-release period, questions must be asked through the SITIS on-line system.
Topics Search Engine: Visit the DoD Topic Search Tool at www.dodsbirsttr.mil/topics-app/ to find topics by keyword across all DoD Components participating in this BAA.