N212-132 TITLE: Large Footprint Silicon Leadless Chip Carrier (LCC)
RT&L FOCUS AREA(S): General Warfighting Requirements (GWR)
TECHNOLOGY AREA(S): Electronics;Materials / Processes;Sensors
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: Develop a large footprint (~2 cm x 2 cm) silicon Leadless Chip Carrier (LCC) that is strategically radiation-hardened for use with Micro-Electromechanical-System (MEMS) sensors.
DESCRIPTION: The performance requirements for sensors used in strategic navigation applications continue to be stringent, necessitating continued innovation for sensor packaging technologies. For commercial applications, conventional LCC materials are typically acceptable for most silicon MEMS sensors, but for strategic applications, the stress induced from coefficient of thermal expansion (CTE) creates mismatches between the package and the sensor, which can result in significant performance errors. Additionally, the radiation-hardness required for strategic applications disqualifies many conventional silicon chip packages from being considered. Examples of existing research for LCC for use with MEMS sensors can be found in the referenced articles [Refs 1-5].
A silicon LCC that can meet the stringent performance requirements of strategic instrumentation is likely to bring value to many existing commercial applications, to support packaging of high performance MEMS which can be used across the commercial class use, for example in automotive class accelerometers among many others.
PHASE I: Design a manufacturing process using existing capabilities in the market to produce a package with the desired goals of: 1) having 40 or more pins that are isolated from an electrically conductive substrate; 2) accommodating chips that have the approximate dimensions: 17mm x 17mm x 3mm; and 3) incorporating a hermetic seal ring to be used with a silicon cap. Material space is not constrained and unique designs are encouraged. Analyze all aspects of fabrication to assess and justify the feasibility and practicality of the designed approach. If the Phase I Option is exercised, include the initial design specifications and capabilities description to build prototype solutions in Phase II.
PHASE II: Based on the Phase I design and execution plan, fabricate and characterize a small lot (up to Qty: 3) of prototype packages. Characterization shall comprise various parameters, including continuity/isolation of the pins, hermeticity of the package, and mechanical surface features (e.g., flatness, parallelism, heights). Deliver the prototypes by the end of Phase II.
PHASE III DUAL USE APPLICATIONS: Based on the prototypes developed in Phase II, continuing development must lead to productization of silicon LCCs. While this technology is aimed at military/strategic applications, LCCs are heavily used in numerous other applications. A silicon LCC that can meet the stringent performance requirements of strategic instrumentation is likely to bring value to many existing commercial applications to support packaging of high performance MEMS, which can be used across the commercial class use for example in automotive class accelerometers.
KEYWORDS: Micro-Electromechanical-System; MEMS; Packaging; Leadless Chip Carrier; Navigation; Sensors; radiation-hardened
TPOC-1: SSP SBIR POC
** TOPIC NOTICE **
The Navy Topic above is an "unofficial" copy from the overall DoD 21.2 SBIR BAA. Please see the official DoD Topic website at rt.cto.mil/rtl-small-business-resources/sbir-sttr/ for any updates.
The DoD issued its 21.2 SBIR BAA pre-release on April 21, which opens to receive proposals on May 19, 2021, and closes June 17, 2021 (12:00pm edt).
Direct Contact with Topic Authors: During the pre-release period (April 21 thru May 18, 2021) proposing firms have an opportunity to directly contact the Technical Point of Contact (TPOC) to ask technical questions about the specific BAA topic. Once DoD begins accepting proposals on May 19, 2021 no further direct contact between proposers and topic authors is allowed unless the Topic Author is responding to a question submitted during the Pre-release period.
SITIS Q&A System: After the pre-release period, proposers may submit written questions through SITIS (SBIR/STTR Interactive Topic Information System) at www.dodsbirsttr.mil/topics-app/, login and follow instructions. In SITIS, the questioner and respondent remain anonymous but all questions and answers are posted for general viewing.
Note: Questions should be limited to specific information related to improving the understanding of a particular topicís requirements. Proposing firms may not ask for advice or guidance on solution approach and you may not submit additional material to the topic author. If information provided during an exchange with the topic author is deemed necessary for proposal preparation, that information will be made available to all parties through SITIS. After the pre-release period, questions must be asked through the SITIS on-line system.
Topics Search Engine: Visit the DoD Topic Search Tool at www.dodsbirsttr.mil/topics-app/ to find topics by keyword across all DoD Components participating in this BAA.